PUSMAK SP2Spray Guns
Air-Purge Spray Gun for Foam & Polyurea
A lightweight, durable air-purge spray gun for polyurethane foam and polyurea — 1.05 kg, with a safety interlock, cleaning kit and spare parts.
Analog Systems
PUSMAK KPX 10+ Polyurea & Spray Foam Machine
A three-phase hydraulic machine for polyurea coating and spray foam, with up to 200 bar, 11.2 kW of preheating and a simplified control panel.
PUSMAK · KPX 10+Image from the PUSMAK catalog, representing this machine range.
PUSMAK KPX 10+ overview
The KPX 10+ is built for polyurea coating and spray foam professionals, with precise proportioning for a balanced mix of both components. A maximum spray pressure of 200 bar (2,900 psi) and an 11,200 W preheating system let you apply polyurea and foam in every season. The hose heating system accepts various heated hoses up to 90 m, and phase sequence is set manually using the included electrical box.
- Ideal application
- Waterproofing, protective coatings and foam — small to medium projects
- Suited to
- New waterproofing companies, Contractors adding polyurea to their services, Multi-application spray crews
Quote request: PUSMAK KPX 10+
- 1-year quality warranty on machines
- 1 year of free maintenance
- 1 year of free training
- Authorized service center & genuine parts
PUSMAK KPX 10+ key features
Hydraulic proportioning system
High precision in operating pressure and mixing ratio.
Horizontal pumping
Easy troubleshooting and maintenance.
Automatic lubrication
An independent ISO lubrication system for infrequent maintenance.
Material counter
Counts only the material actually sprayed.
Heater controllers
Precise temperature setting with manual on/off.
Hose up to 90 m
Accepts various heated hose types.
Key benefits
- Polyurea and foam from one machine
- Simplified, easy-to-use interface
- Easier maintenance thanks to horizontal pumping and auto lubrication
- An economical entry into waterproofing and protective coatings
PUSMAK KPX 10+ technical specifications
| Weight | 305 kg |
|---|---|
| Supply Voltage | 380 V |
| Number of Phases | 3 |
| Frequency | 50/60 Hz |
| Preheater Power | 11.2 kW |
| Maximum Hose Heater Power | 5.6 kW |
| Installed Power | 22.2 kW |
| Pump System | Hydraulic |
| Maximum Hose Length | 90 m |
| Approximate Output per Cycle | 230 g |
| Maximum Flow Rate | 5.6 kg/min |
| Mixing Ratio | 1:1 |
| Maximum Liquid Temperature | 80°C |
| Maximum Working Pressure | 200 Bar |
| Height | 1.20 m |
| Width | 1.05 m |
| Length | 0.75 m |
Source: official PUSMAK catalog (April 2026). Specifications may change by version and are confirmed in the quote.
PUSMAK KPX 10+ applications
Polyurea Spray Equipment for Waterproofing
A flexible polyurea membrane that stops water.
Polyurea Spray Equipment for Water Tank Lining
An internal tank lining against leakage.
Spray Equipment for Polyurea Protective Coatings
A protective layer against corrosion and impact.
Spray Foam Equipment for Roof Insulation
Continuous thermal insulation that cuts heat gain.
Accessories for the PUSMAK KPX 10+
The spray gun, heated hoses and transfer pumps that complete the spray line. We confirm lengths and fittings for your machine in the quote.
PUSMAK PH15Heated Hoses
15 m Heated Hose
A universal 15 m heated hose, 3/8 in inner diameter with an E-type thermocouple, rated to 200 bar and 90°C.
PUSMAK PH30Heated Hoses
30 m Heated Hose
A universal 30 m heated hose, 3/8 in inner diameter with an E-type thermocouple, rated to 200 bar and 90°C.
PUSMAK PH3Whip Hoses
3 m Heated Whip Hose
An ultra-flexible 3 m, 1/4 in section that links the main heated hose to the spray gun for easier movement in tight spots.
PUSMAK PH6Whip Hoses
6 m Heated Whip Hose
A flexible 6 m, 1/4 in whip section that gives a wider working radius between the end of the heated hose and the gun.
PUSMAK TPTransfer Pumps
Pneumatic Transfer Pump for Drums & IBC Tanks
A non-sparking, air-driven transfer pump that feeds both components from drums or IBC tanks to the spray machine at up to 19 L/min.
PUSMAK KPX 10+ FAQ
Didn't find your answer? Contact our team directly.
Yes — the KPX 10+ is designed for polyurea coating and spray foam, with 200 bar maximum pressure and 11.2 kW of preheating.
The KPX 10+ raises maximum working pressure from 160 to 200 bar and preheating from 9.6 to 11.2 kW, making it suitable for polyurea. Maximum flow is 5.6 kg/min versus 5.8 on the KPX 10.
Up to 90 m of heated hose.
Trusted Line provides a one-year quality warranty on all machines from the date of purchase, plus one year of free maintenance and one year of free training for your team.
Request a Quote — PUSMAK KPX 10+
Send your project details and our sales team will get back to you.
Related equipment
PUSMAK KPX 20+Medium Level Systems
Hydraulic Polyurea Coating Machine
A professional hydraulic machine for polyurea and spray foam, with 200 bar, error detection, touchscreen diagnostics and automatic phase-sequence adjustment.
PUSMAK KPX 40High Performance Systems
High-Performance Polyurea Coating Machine
A high-performance hydraulic machine for polyurea coating and spray foam, with up to 10.3 kg/min, 12.4 kW of preheating and hoses up to 105 m.
PUSMAK KPX 10Analog Systems
Hydraulic Spray Foam Machine — Analog Control
A three-phase hydraulic spray foam machine from the Analog Systems range, with hoses up to 90 m and flow up to 5.8 kg/min for thermal-insulation work.
Articles about this product
Buying guide8 min read
Polyurea spray machine for sale
The PUSMAK KPX 10+ polyurea spray machine for sale in Saudi Arabia, for contractors and waterproofing companies: specifications, uses, KPX 10 vs KPX…
Fundamentals2 min read
What is polyurea, and what machine sprays it?
What polyurea is — sets in seconds, flexible, water- and abrasion-resistant — and why it needs a machine with more pressure and heat.