PUSMAK KPX 10+ polyurea spray machine for sale to contractors in Saudi Arabia
If you are looking for a polyurea spray machine for sale in Saudi Arabia to equip a waterproofing company or upgrade your contracting equipment, the PUSMAK KPX 10+ is a professional option designed for polyurea and polyurethane foam applications, with hydraulic pumping and pressure and temperature control.
Insulation and industrial protective coating companies need equipment that can process two-component materials at the specified ratios and operating conditions, especially on concrete surfaces and industrial facilities.
Trusted Line, PUSMAK's agent in the Kingdom of Saudi Arabia, provides solutions for insulation contractors; contact the company to ask about availability, configuration and pricing for this model.
The PUSMAK KPX 10+ polyurea spray machine and its features
The KPX 10+ is a hydraulic spray machine with analog control, designed for professional application of two-component materials.
Its design focuses on easy control and following operating variables, with heating for materials and hoses according to its technical specifications.
Key machine features
Hydraulic pumping for professional applications.
A maximum working pressure of 200 bar.
A maximum flow rate of up to 6.84 kg/min.
A 1:1 mixing ratio for the two components.
11.2 kW of preheating.
Supports heated hoses up to 90 m.
An easy-to-use analog control panel.
Electrical phase-sequence control.
A design that makes some pumping components easier to reach for maintenance.
These features help set up spray lines that suit contractors working on waterproofing and industrial coating projects.
PUSMAK KPX 10+ technical specifications
| Specification | Value |
|---|---|
| Manufacturer | PUSMAK |
| Model | KPX 10+ |
| Drive type | Hydraulic |
| Control system | Analog |
| Power | 380 V, three-phase |
| Maximum working pressure | 200 bar |
| Maximum flow | 6.84 kg/min |
| Mixing ratio | 1:1 |
| Preheating | 11.2 kW |
| Hose heating | Up to 6 kW according to the data sheet |
| Maximum hose length | 90 m |
| Maximum fluid temperature | 80 °C |
These values come from the manufacturer's data; configuration details or some values may differ between machine versions. Confirm them with the supplier before buying.
Uses of the KPX 10+ on insulation projects in Saudi Arabia
1. Concrete roof insulation
Suitable polyurea systems are used to create insulation and protection layers on prepared concrete surfaces.
Application quality depends on surface preparation, the choice of material and setting the pressure and temperature according to the manufacturer's instructions.
2. Waterproofing projects
Insulation companies need spray equipment suited to fast-reacting materials, especially on large areas or repeat work.
The KPX 10+ can be used in waterproofing systems compatible with its technical specifications.
3. Industrial floor coatings
Some polyurea formulations are used to protect industrial floors exposed to abrasion and operating conditions.
The coating system should be chosen to suit the project's requirements, including resistance to wear, chemicals and the type of use.
4. Protecting metal surfaces
Suitable coatings can be applied to prepared metal surfaces to help provide the protection required, according to the material's specifications.
5. Truck bed and vehicle coatings
Suitable polyurea systems can be used to apply protective layers to some vehicle surfaces and truck beds, depending on material approval and preparation requirements.
PUSMAK lists the KPX 10+ among its polyurea vehicle coating solutions.
What is the difference between the KPX 10 and the KPX 10+?
Despite the similar name and design, there are important differences in use.
| Comparison | KPX 10 | KPX 10+ |
|---|---|---|
| Main use | Spraying polyurethane foam | Polyurea and foam |
| Drive system | Hydraulic | Hydraulic |
| Control | Analog | Analog |
| Maximum pressure | 160 bar | 200 bar |
| Mixing ratio | 1:1 | 1:1 |
| Target users | Thermal insulation contractors | Waterproofing and coating contractors |
If your work is limited to spraying foam, the KPX 10 may be suitable depending on the material you use.
If you need to carry out polyurea work, the KPX 10+ offers specifications worth comparing.
See the PUSMAK KPX 10 hydraulic spray foam machine to compare the options available.
Why does a contractor buy a hydraulic spray machine?
For professional insulation work, the pumping system must suit the pressure and flow requirements of the materials.
Hydraulic systems allow spray equipment to run within specific pressure and flow ranges, depending on each model's design.
Important points for a contractor:
Being able to process materials at a rate that suits the project.
Controlling pressure within the operating limits.
Using compatible heated hoses.
Following working conditions from the control panel.
Being able to carry out maintenance according to the manufacturer's instructions.
Choosing a machine on working pressure alone is not enough; the heating system, flow rate, gun and raw materials also need to be considered.
The equipment needed to set up a polyurea spray line
A contractor may need several accessories to set up a complete spray system.
PUSMAK SP2 gun
This gun is used to apply foam and polyurea materials in compatible systems and has a compressed-air purge cleaning system.
See the PUSMAK SP2 polyurea and foam spray gun for contractors as one option for equipping the spray line.
Heated hoses
The hoses help carry the materials while keeping them at the required temperature.
Products available include the PUSMAK PH30 30 m heated hose for spray foam and polyurea; check its compatibility with the machine.
Material transfer pumps
Feed pumps are used to move the two components from the drums to the spray machine.
Pumps, hoses and fittings should be chosen according to the pressure specifications, the type of material and the feed requirements.
How much does a PUSMAK KPX 10+ cost in Saudi Arabia?
The final price depends on the machine's configuration and the accessories included in the supply offer.
Factors that affect the cost include:
The length and number of hoses.
The type of spray gun.
Raw material transfer pumps.
Air compressor requirements.
Additional spare parts.
Transport and set-up costs.
Training, warranty and maintenance services.
For an accurate offer, send the project details and the machine model you want to the sales team.
Why choose Trusted Line?
Trusted Line supplies PUSMAK equipment to contractors and insulation companies in the Kingdom of Saudi Arabia.
The company provides a range of equipment-related services, including:
Spray machine supply: foam and polyurea equipment in different models.
Guns and hoses: accessories for setting up industrial spray lines.
Spare parts: enquiries about the right parts for supported models.
Maintenance: technical support and equipment maintenance according to the service terms.
Training: help preparing teams to operate the equipment correctly.
Confirm availability, warranty and the services included for each model before placing an order.
Who is the PUSMAK KPX 10+ for?
It may be a good choice for:
Waterproofing contractors.
Polyurea application companies.
Industrial contracting companies.
Surface coating and protection contractors.
Polyurea vehicle coating workshops.
Insulation companies that want to add new services.
The final choice depends on the material, the mixing ratio, the project's requirements and the electrical capacity available.
Frequently asked questions
Is the KPX 10+ suitable for spraying both foam and polyurea?
Yes. It is designed for polyurea and polyurethane foam applications that match its specifications.
Does it run on 220 V power?
The machine needs a three-phase electrical supply according to the version's specifications; it is not a single-phase domestic machine.
Can it be used to line water tanks?
Polyurea spray equipment can be used with materials approved for tank applications, provided the material suits the intended use, especially where it will be in contact with drinking water.
Can I buy the machine with the gun and hoses?
Yes, you can request a quote that includes the machine and the right equipment, specifying all the accessories you need.
Where can I find a PUSMAK KPX 10+ in Saudi Arabia?
Contact Trusted Line to ask about availability, supply options, accessories and prices for this model.
Request a quote for a PUSMAK KPX 10+ in Saudi Arabia
If you are a waterproofing contractor or run a company specialising in polyurea applications, contact Trusted Line to ask about the KPX 10+ and its configuration.
Specify the type of project, the materials used, the power source and the hose length required, to get the right recommendation.
Request a quote for polyurea and foam spray machines from Trusted Line
You can also compare the options with the PUSMAK KPX 20+ polyurea and foam spray machine.
Trusted Line – PUSMAK's agent in Saudi Arabia
Location: Sari Street, Al Faisaliyah District, Jeddah.
Phone and WhatsApp: +966 53 882 2832.
