PUSMAK PTM pneumatic foam shaving machine for sale to contractors in Saudi Arabia
If you are looking for a pneumatic foam shaving machine to remove the excess left by polyurethane spraying, the PUSMAK PTM is designed for thermal insulation contractors who need to trim surfaces and prepare them before finishing work.
The machine runs on compressed air instead of an electric motor, which makes it worth considering on sites with a suitable air compressor.
Contractors and insulation companies in Saudi Arabia can contact Trusted Line to ask about supplying the machine and its accessories.
The PUSMAK PTM pneumatic foam shaving machine and its features
The PTM is used to trim cured polyurethane foam and level high spots after spraying, especially on walls and ceilings that need a set level before finishing materials go on.
Key features
Runs on compressed air.
A 38 cm cutting width.
A 20 mm cutting depth according to the manufacturer's specifications.
A weight of 4.5 kg.
A no-load speed of 400 to 2,600 rpm.
A design suited to levelling foam surfaces.
Can be used on projects with a suitable air supply.
The machine helps contractors carry out trimming in an organised way, within the safety requirements and operating limits of the equipment.
PUSMAK PTM technical specifications
| Specification | Details |
|---|---|
| Brand | PUSMAK |
| Model | PTM |
| Machine type | Foam levelling and shaving machine |
| Drive | Pneumatic |
| Cutting width | 38 cm |
| Cutting depth | 20 mm |
| Maximum foam density | 60 kg/m³ |
| No-load speed | 400–2,600 rpm |
| Required air pressure | 6.2 bar |
| Weight | 4.5 kg |
| Minimum air inlet diameter | 3/4 in |
These values are based on the manufacturer's data. Check the air flow requirements and the right compressor before buying.
See the PUSMAK PTM pneumatic polyurethane foam shaving machine and its specifications on the manufacturer's site.
Why do insulation companies need a foam trimming machine?
Spraying polyurethane can leave an uneven insulation surface because of how the material expands, the shape of the surface or the application method.
On some projects, high spots must be removed to reach the required level before walls are closed or finishing boards are installed.
Levelling equipment helps to:
Remove excess foam once it has cured.
Prepare surfaces for finishing work.
Rely less on hand cutting over large areas.
Make it easier to treat areas that need a flat surface.
Support contracting teams that specialise in interior insulation.
Never remove more thickness than the insulation design allows.
Uses of the PUSMAK PTM on contracting projects
Interior wall insulation
The machine can remove excess foam between wall members before the right finishing materials are installed.
Levelling ceiling insulation
Some ceiling insulation applications need the polyurethane layer trimmed to a suitable level for the next stages of work.
Warehouses and industrial facilities
Insulation companies benefit from trimming equipment when the project specification includes levelling the sprayed surfaces.
Correcting insulation layers
Local excess can be removed once the material has fully cured, provided the required thickness and the integrity of the system are not affected.
PTM (pneumatic) vs. ETM (electric)
PUSMAK offers two options for levelling polyurethane foam.
| Comparison | PTM | ETM |
|---|---|---|
| Drive | Pneumatic | Electric |
| Cutting width | 38 cm | 38 cm |
| Cutting depth | 20 mm | 20 mm |
| Weight | 4.5 kg | 5 kg |
| Power source | Air compressor | Electricity |
| Use | Foam levelling | Foam levelling |
If the site has a suitable air compressor, the PTM may be the right choice. If electric power suits the site better, consider the ETM.
To compare the two, visit PUSMAK's spray foam equipment and trimming tools section.
Is the PTM suitable for new insulation companies?
It can be a useful addition for companies that offer foam spraying and finishing of insulation surfaces.
But it does not replace a polyurethane spray machine: it is for trimming material after it has been applied.
To set up a complete insulation business, a company may need a spray machine and its accessories, protective equipment and finishing tools, depending on the type of projects.
Browse spray foam machines for contractors and insulation companies at Trusted Line to see the categories of spray equipment.
PUSMAK PTM foam shaving machine price in Saudi Arabia
The final price depends on availability, configuration, supply costs and the accessories required.
Before buying, check:
The capacity of your air compressor.
Compatible air connections.
Availability of spare parts and cutting parts.
Warranty terms.
Transport and delivery costs.
Whether the machine suits the density of foam you use.
Contact Trusted Line for information on supply and pricing.
Tips for operating a foam shaving machine safely
The machine should be used by an operator trained on pneumatic cutting equipment.
Important guidelines:
Make sure the foam has cured enough before trimming.
Wear suitable eye, hearing and respiratory protection.
Use a suitable method of dust control.
Check the rotating parts before starting.
Do not exceed the approved air pressure.
Disconnect the air before maintenance or changing cutting parts.
Make sure there are no hidden services in the work area.
Frequently asked questions
Does the PUSMAK PTM run on electricity?
No, it runs on compressed air. The electric ETM is available as an alternative.
What is the cutting width?
The nominal cutting width is 38 cm.
Is it suitable for levelling foam on walls?
Yes. It is designed to trim polyurethane foam in applications that fall within the machine's specifications.
Does it need an air compressor?
Yes. You need a compressor that meets the pressure and air flow requirements set by the manufacturer.
Can it be used with all types of insulation?
No. Check that the material, its density and its thickness are within the operating limits.
Where can I order a PTM machine in Saudi Arabia?
Contact Trusted Line to ask about availability and pricing for the PUSMAK PTM.
Order a PUSMAK PTM for insulation projects in Saudi Arabia
If you are a thermal insulation contractor or run a company specialising in polyurethane spray foam, contact Trusted Line to ask about the PTM pneumatic machine and its accessories.
Contact Trusted Line for a quote on foam levelling equipment
Or browse the thermal insulation machines and equipment on the site.
Trusted Line – PUSMAK equipment in Saudi Arabia
Jeddah, Saudi Arabia.
