PUSMAK PH15 heated spray foam hose for sale to contractors in Saudi Arabia
If you are looking for a heated spray foam hose to equip a polyurethane machine or replace your current spray hoses, the 15 m PUSMAK PH15 is an industrial product designed to help keep the materials at temperature as they travel to the spray gun.
The hose is used in two-component foam and polyurea systems and helps thermal insulation and waterproofing contractors set up spray lines for small and medium projects, or add sections to compatible spray lines.
Trusted Line, PUSMAK's agent in the Kingdom of Saudi Arabia, supplies spray equipment and accessories to contractors and insulation companies; contact the company for specifications and prices and to confirm the product suits your machine.
The PUSMAK PH15 heated spray foam hose and its features
The PH15 is an industrial hose designed to carry raw materials from the spray machine to the application gun while limiting heat loss as the components pass through the line.
Additional PH15 sections can be combined in some spray systems, provided the machine's approved hose length and heating capacity limits are respected.
Key features
A 15 m length suited to short and medium distances.
A heating system that helps keep the materials warm.
A thermal insulation layer to limit heat loss.
A Type E temperature sensor for measuring temperature within a compatible system.
A design dedicated to polyurethane and polyurea spray lines.
Extra sections can be added in systems that allow it.
An outer cover to help protect the hose during work.
An industrial design suited to professional insulation contractors.
To learn about the product, see the PUSMAK PH15 15 m heated hose for spray foam and polyurea equipment at Trusted Line.
PUSMAK PH15 technical specifications
Before buying, review the hose's length, diameter, maximum pressure, sensor type and the fittings compatible with your spray machine.
| Specification | Details |
|---|---|
| Manufacturer | PUSMAK |
| Model | PH15 |
| Product type | Heated industrial spray hose |
| Length | 15 m |
| Maximum working pressure | 240 bar |
| Maximum temperature | 90 °C |
| Temperature sensor | E-Type |
| Use | Spraying polyurethane and polyurea |
| Extendable | Can be combined in compatible systems |
Some details of internal diameter and heating capacity differ between the online product sheet and the latest catalog, so rely on the specifications supplied with the version you buy.
See the official PUSMAK PH15 technical specifications for product details.
Why do insulation machines need heated hoses?
Polyurethane and polyurea spray applications depend on specific operating conditions, including mixing ratio, pressure and temperature.
As the materials travel from the machine to the spray gun, they can lose some of their heat because of the ambient temperature and the length of the line.
A drop in material temperature can change its viscosity and affect flow and mixing conditions.
Hoses with a suitable heating system help to:
Limit the drop in component temperature along the way.
Support an even material flow.
Maintain the required application conditions.
Make work over different distances easier.
Reduce the need to move the machine around the project site.
Use the hose with the recommended heating system and do not exceed the set temperature and pressure limits.
Uses of the PH15 hose on insulation projects in Saudi Arabia
Villa and building roof insulation
A 15 m spray line can be used on projects where the machine can be placed close to the work area.
The hose gives the operator a suitable range of movement when spraying polyurethane foam on roofs.
Warehouse and hangar insulation projects
Industrial insulation sites need spray lines that match the project's dimensions.
The PH15 can be considered as part of a main spray line or as an extra extension when the machine's specifications allow it.
Polyurea applications
Some polyurea materials need to stay at a specific temperature until they reach the application gun.
This type of hose can be used with spray systems that are compatible in terms of pressure, heating and fittings.
Interior insulation work
Shorter hoses may suit confined work sites where the equipment route needs to be controlled and unnecessary extra length avoided.
PUSMAK PH15 vs. PH30
PUSMAK offers heated hoses in different lengths to meet contractors' needs.
| Comparison | PH15 | PH30 |
|---|---|---|
| Length | 15 m | 30 m |
| Type | Heated | Heated |
| Use | Foam and polyurea | Foam and polyurea |
| Distance | Short and medium | Medium and longer |
| Choose it | When the machine is close by | Depending on the site area |
If the distance between the machine and the spray gun is limited, the PH15 may be a good option.
Projects that need a greater distance can consider the PUSMAK PH30 30 m heated hose, after confirming it is compatible with the equipment.
A longer hose does not always mean better performance; the line's heating capacity, pressure loss and operating requirements must be considered.
Can the PH15 be used with spray machines from different manufacturers?
PUSMAK describes this product as a multi-purpose hose, but actual compatibility must be checked before installation.
The key compatibility points are:
The spray machine model.
The maximum pressure.
The heating system and its capacity.
The type of temperature sensor.
The hose diameter.
The fitting sizes.
The type of chemicals.
The maximum spray line length.
Whether you use a PUSMAK machine or another brand, it is best to send the machine details to the supplier before choosing the hose.
Accessories a contractor needs with the PH15 hose
When setting up a complete spray system, you may need additional equipment and accessories.
PUSMAK SP2 gun
The spray gun mixes the components and applies them to surfaces; the SP2 has an air-purge cleaning system.
See the PUSMAK SP2 spray foam and polyurea gun for contractors for its specifications.
Material transfer pumps
Feed pumps move raw materials from drums to the machine in systems that need an external feed.
Products available include the PUSMAK TP pneumatic pump.
Flexible spray gun hoses
The operator may need flexible connections between the main line and the application gun for a better range of movement.
Options include the PUSMAK PH3 and PH6; compatibility must be confirmed.
Browse the spray foam and polyurea equipment and accessories at Trusted Line to see the products available for contractors.
What is the price of a PUSMAK PH15 hose in Saudi Arabia?
The price of industrial hoses varies with the specifications, what the offer includes and supply requirements.
Factors that affect the cost include:
Hose length.
The heating system's specifications.
The type of sensor and fittings.
The accessories required.
Compatibility requirements with the machine.
Transport and delivery costs.
For a suitable price, specify the machine model, the length required and the city the equipment will be delivered to.
You can request a quote for spray foam hoses and insulation equipment from Trusted Line.
Why buy PUSMAK equipment from Trusted Line?
Trusted Line supplies a range of PUSMAK spray foam and polyurea machines and industrial accessories in the Kingdom of Saudi Arabia.
Products and services related to contracting work include:
Spray machines: polyurethane and polyurea equipment.
Hoses: heated and flexible hoses in different lengths.
Spray guns: equipment for applying two-component materials.
Feed pumps: raw material transfer equipment.
Spare parts: help identifying the right parts for your equipment.
Technical support: reviewing project requirements and equipment compatibility before purchase.
Insulation companies in Jeddah, Riyadh, Dammam, Makkah, Madinah and other cities can ask about supply and delivery.
Tips before buying an industrial spray hose
To make sure you choose the right equipment:
Identify the machine model you use.
Review the hose heating requirements.
Choose the right length for the work area.
Confirm the maximum working pressure.
Check the sensor type and fittings.
Ask whether the line can be extended.
Make sure the necessary accessories are available.
Request a detailed quote before buying.
Do not use hoses that show signs of damage, leaks, or damage to the wiring or outer cover.
Frequently asked questions
Is the PUSMAK PH15 hose suitable for foam and polyurea?
Yes. It is designed for polyurethane and polyurea spray systems that match its technical specifications.
How long is the hose?
The nominal length is 15 m.
Can more than one PH15 hose be connected?
Some spray lines can be extended with extra sections, but the final length depends on the machine's capacity, the heating system and the approved operating limits.
Does the hose need electricity?
It has a heating system that needs the proper supply and control from a compatible system.
Can it be used with a KPX 20?
Its compatibility with the machine can be checked, but review the pressure, heating and fitting requirements before installation.
Where can I buy a heated spray foam hose in Saudi Arabia?
Contact Trusted Line to ask about availability and prices of the PH15 and the right equipment.
Order a PUSMAK PH15 hose in Saudi Arabia
If you run a thermal insulation or waterproofing company and need new spray hoses, or want to set up an extra spray line, the Trusted Line team can help you identify the right equipment.
Send the machine model, the length required and the material type to get a quote.
Request a quote for a PUSMAK PH15 hose and spray foam equipment in Saudi Arabia
Or view the PUSMAK PH15 15 m heated spray foam hose.
Trusted Line – PUSMAK's agent in Saudi Arabia
Location: Jeddah, Saudi Arabia.
