PUSMAK PH30 heated spray foam hose for sale to contractors in Saudi Arabia
If you are looking for a spray foam hose to equip a polyurethane machine or replace the hoses used on insulation projects, the 30 m PUSMAK PH30 is industrial equipment designed to carry raw materials while keeping them at temperature during operation.
Trusted Line, PUSMAK's agent in the Kingdom of Saudi Arabia, supplies spray hoses and specialised equipment to contractors and thermal insulation and waterproofing companies, as well as spray machines, guns and material transfer pumps.
Whether you insulate roofs, warehouses or industrial facilities, choosing the right hose helps set up the spray line to suit the work.
The PUSMAK PH30 spray foam hose and its features
The PUSMAK PH30 is an industrial heated hose used in two-component polyurethane and polyurea spray systems.
It carries the materials from the spray machine to the application gun, with a heating system that helps maintain the required temperature along the way.
Key features
A 30 m length that suits many contracting projects.
A dedicated heating system to keep the materials warm.
A design suited to polyurethane and polyurea applications.
Reach over wider work areas.
Supports compatible industrial spray systems.
Less need to keep moving the machine around the site.
Can be used in multi-section spray lines, depending on the system's specifications.
For product details, see the PUSMAK PH30 30 m heated spray foam hose at Trusted Line.
PUSMAK PH30 technical specifications
Before buying hoses for insulation machines, make sure they are compatible with the working pressure, the heating system and the fittings used.
| Specification | Details |
|---|---|
| Manufacturer | PUSMAK |
| Model | PH30 |
| Product type | Heated spray hose |
| Length | 30 m |
| Maximum working pressure | 200 bar |
| Temperature sensor | Type E |
| Applications | Polyurethane and polyurea |
| Use | Carrying materials between the machine and the spray gun |
Review the specifications of the actual version and the compatibility requirements before installation.
See the PUSMAK PH30 hose specifications and price in Saudi Arabia and contact the sales team to find out what configurations are available.
Why do insulation companies need heated spray hoses?
Polyurethane and polyurea applications depend on specific operating conditions, including pressure, mixing ratio and material temperature.
As the components travel through the hoses, they can lose some of their heat because of ambient conditions and the length of the line.
A suitable heating system helps limit this loss and keep application conditions stable.
The operating benefits include:
Supporting stable material temperature.
Maintaining the required flow conditions.
Making spray work easier on large sites.
Better organisation of equipment on the project site.
Less need to move the machine between work areas.
Performance does not depend on the hose alone, but on all components of the system being compatible with the material used.
Uses of PUSMAK hoses on contracting projects in Saudi Arabia
Villa and building roof insulation
Thermal insulation companies need spray lines that let the technician reach every part of the roof.
A 30 m length can give enough freedom of movement, depending on the project area and where the machine is placed.
Warehouse and hangar insulation
Some warehouses have large areas and several heights, so the hose route needs planning before insulation work begins.
Industrial heated hoses help carry materials to the application area according to the spray system's requirements.
Polyurea waterproofing projects
Spray polyurea systems need controlled pressure and heating conditions.
Hoses compatible with these systems can feed the spray gun with the components at the required temperature.
Industrial facilities and projects
Suitable spray lines can be used for industrial protection and surface coating applications, depending on the materials used and site requirements.
PUSMAK PH15 vs. PH30
PUSMAK hoses come in different lengths to suit contracting companies' needs.
| Comparison | PH15 | PH30 |
|---|---|---|
| Length | 15 m | 30 m |
| Type | Heated | Heated |
| Use | Foam and polyurea | Foam and polyurea |
| Range of movement | Short distances | Longer distances |
| Best choice for | Compact work sites | Projects that need longer reach |
If your work needs a shorter distance, see the PUSMAK PH15 15 m heated hose.
If you need a longer line, consider the PH30, making sure the machine can run the required length.
Can the hose be fitted to different spray machines?
Buying an industrial hose based on length alone is not recommended, as there are technical requirements to check.
The most important are:
The machine's manufacturer and model.
The maximum working pressure.
The capacity of the hose heating system.
The type of temperature sensors.
The fitting sizes.
Chemical compatibility with the internal parts.
The maximum permitted spray line length.
The sales team can help you review these requirements before you confirm an order.
Equipment you can buy with the PH30 hose
When setting up a new machine or upgrading an insulation company's equipment, you may need additional accessories.
Spray foam and polyurea guns
Spray guns are used to mix the components and apply them to surfaces.
Options include the PUSMAK SP2 with air-purge cleaning; make sure it is compatible with the machine and hoses.
Raw material transfer pumps
Some machines need separate pumps to draw the components from drums and feed the spray system.
PUSMAK TP pumps are available for industrial material transfer systems.
Flexible spray hoses
Suitable flexible connections can be used at the spray gun to make it easier for the technician to move, provided they are compatible with the system.
Browse PUSMAK spray foam and polyurea machine accessories to find the right options for your equipment.
How much does a PUSMAK PH30 hose cost in Saudi Arabia?
The price of industrial hoses varies with the specifications, configuration and accessories required.
Factors that affect the cost include:
Hose length.
The heating system's specifications.
The type of fittings and sensors.
The equipment included in the offer.
Supply and delivery requirements.
Any extra parts required.
For an accurate price, specify your spray machine model, the type of materials used and the length required.
You can request a quote for a PUSMAK PH30 hose in Saudi Arabia from Trusted Line.
Why buy hoses and spray equipment from Trusted Line?
Trusted Line supplies PUSMAK products to contractors and insulation companies in the Kingdom of Saudi Arabia.
The range of products and services includes:
Spray machines: specialised equipment for applying polyurethane foam and polyurea.
Heated hoses: several options for setting up spray lines to suit the project.
Spray guns: accessories for applying two-component materials.
Transfer pumps: equipment for feeding machines with raw materials.
Spare parts: help sourcing the right parts for your equipment.
Technical support: reviewing operating and compatibility requirements when choosing equipment.
Customers in Jeddah, Riyadh, Dammam, Makkah, Madinah and the rest of the Kingdom can contact the company to ask about prices, availability and delivery options.
Tips before buying spray foam hoses
To choose the right equipment, follow these steps:
Identify the model of your spray machine.
Work out the length you need based on your project areas.
Review the working pressure and heating system.
Check the type of temperature sensor.
Check the fittings and their sizes.
Ask about compatible spare parts and accessories.
Request a quote that lists all the equipment included.
Following these steps reduces the chance of buying equipment that is not compatible with your system.
Frequently asked questions
Is the PUSMAK PH30 hose suitable for polyurea?
Yes. It is designed for use in polyurethane and polyurea spray systems that match its specifications.
Is the hose 30 m long?
Yes. The nominal length of the PH30 is thirty metres.
Can two hoses be connected together?
Whether the line can be extended depends on the machine's capacity, the heating system and the maximum length approved by the manufacturer.
Does it work with the KPX 20?
Check the PH30's compatibility with the KPX 20 against the machine's specifications, fittings and heating system before installation.
What is the difference between the PH15 and the PH30?
The main difference is length: the PH15 is fifteen metres long, while the PH30 is thirty metres.
Where can I buy spray foam hoses in Saudi Arabia?
Contact Trusted Line, the supplier of PUSMAK equipment, to ask about available hoses and confirm specifications and prices.
Can I order hoses without buying a new machine?
Yes, you can request a quote for the hoses on their own; provide details of the machine you use so compatibility can be checked.
Order a PUSMAK PH30 spray foam hose in Saudi Arabia
If you are a thermal insulation or waterproofing contractor looking for a new heated hose, or need to set up a complete spray line for your project, contact Trusted Line to find the right options.
Send the machine model, the length required and the delivery city to get a quote with the available equipment.
Request a quote for a PUSMAK PH30 spray foam hose from Trusted Line
Or view the PUSMAK PH30 heated hose and its product specifications.
Trusted Line – PUSMAK's agent in Saudi Arabia
Location: Sari Street, Al Faisaliyah District, Jeddah.
Phone and WhatsApp: +966 53 882 2832.
