PUSMAK ETM foam cutting machine for sale in Saudi Arabia, for contractors and insulation companies
If you are looking for a foam cutting machine to level thermal insulation surfaces after spraying polyurethane, the PUSMAK ETM is an electric tool designed to remove excess material and trim foam layers, helping contractors prepare surfaces for the finishing stages.
Thermal insulation companies need specialised equipment that goes beyond spraying the material, including levelling and trimming tools, especially for insulation work inside buildings and warehouses and on roofs and walls.
PUSMAK makes the ETM electric machine for this purpose, and contractors in Saudi Arabia can contact Trusted Line to ask about supplying it and its accessories.
The PUSMAK ETM foam cutting machine and its features
The ETM is a polyurethane foam trimming and levelling tool. An electric motor drives a set of cutting blades designed to remove excess from the foam surface once it has cured sufficiently.
Its design lets it cover wider areas than small hand cutting tools, though the working method should suit the surface.
Key features
A 750 W electric motor.
A cutting width of up to 38 cm.
A 20 mm cutting depth according to the product specifications.
A no-load speed of 3,000 to 11,000 rpm.
A weight of about 5 kg.
A side handle for control during operation.
A design suited to trimming polyurethane foam.
Can be used on insulation projects that need surface levelling.
The machine is used within the material density limits and technical specifications approved by the manufacturer.
PUSMAK ETM technical specifications
| Specification | Value |
|---|---|
| Brand | PUSMAK |
| Model | ETM |
| Equipment type | Foam smoothing and trimming machine |
| Power source | Electric |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Power | 750 W |
| Cutting width | 38 cm |
| Cutting depth | 20 mm |
| No-load speed | 3,000–11,000 rpm |
| Weight | 5 kg |
| Maximum foam density | 60 kg/m³ according to the manufacturer's rating |
See the PUSMAK ETM electric foam smoothing and cutting machine and its technical specifications from the manufacturer.
Why does an insulation contractor need a foam levelling machine?
After polyurethane foam is applied, the layer can vary in thickness or have high spots because of how spraying works, the shape of the surface and site conditions.
On some projects, this excess needs removing before finishing materials or additional layers are installed.
The right trimming equipment helps to:
Remove excess foam from specific areas.
Make the insulation surface flatter.
Prepare the surface for the next finishing stages.
Rely less on hand cutting over large areas.
Organise the trimming of insulation layers on repeat projects.
Not every foam surface needs cutting after spraying; it depends on the insulation system, the project requirements and the approved specifications.
Uses of the PUSMAK ETM in Saudi Arabia
Interior wall insulation
When foam is sprayed into cavities or between structural members, the contractor may need to remove high spots to reach the required level before finishing boards are installed.
Roof insulation
In some insulation applications, trimming equipment can be used to deal with excess once the foam has fully cured according to the material's instructions.
Warehouses and hangars
Industrial projects may need specific areas of the insulation layer levelled to help complete installation and finishing work.
Repair and insulation renewal
Cutting tools can help remove excess polyurethane foam during corrective work, as long as the material and the tool are suited to each other.
Electric vs. pneumatic foam smoothing machines
PUSMAK offers two trimming models: the electric ETM and the pneumatic PTM.
| Comparison | PUSMAK ETM | PUSMAK PTM |
|---|---|---|
| Drive | Electric | Compressed air |
| Cutting width | 38 cm | 38 cm |
| Cutting depth | 20 mm | 20 mm |
| Weight | 5 kg | 4.5 kg |
| Operating requirements | A suitable electrical supply | A suitable air compressor |
The choice depends on the power sources available on site, the team's equipment and operating preferences.
See the PUSMAK PTM pneumatic foam smoothing machine and how it compares with the electric version.
Can the ETM be used with every type of foam?
The tool is designed to trim polyurethane foam within the density range and cutting capacity set out in its specifications.
It should not be assumed suitable for every insulation material or type of foam.
Before use, check:
The type of insulation material.
The foam density after curing.
The thickness to be removed.
Whether the surface is suitable for cutting.
That curing is complete according to the material's instructions.
That safety and dust-control measures are in place.
Use suitable eye, respiratory and hearing protection, and do not run the machine without its dedicated guards.
Is the ETM suitable for new insulation companies?
It can be a helpful tool for firms that offer foam thermal insulation services, especially when their projects include a trimming and levelling stage.
But it does not replace a spray machine; each machine does a different job.
If you want to equip a complete insulation business, you may need a machine to apply the materials, a spray gun, hoses, feed equipment and suitable finishing tools.
Browse the spray foam machines and polyurethane equipment available from Trusted Line and compare options for equipping your project.
PUSMAK ETM foam cutting machine price in Saudi Arabia
The price of trimming equipment varies with the model, configuration, accessories, shipping and supply terms.
When asking about the price, it is worth checking:
Does the offer include the complete machine?
Which accessories come with it?
Are suitable blades or replacement parts available?
What is the warranty period and what are its terms?
What shipping and delivery options are there within Saudi Arabia?
Because the local price is not fixed, it is better to request a formal quote than to rely on estimates.
Why contact Trusted Line?
Trusted Line supplies PUSMAK equipment to contractors and insulation companies in the Kingdom of Saudi Arabia.
Equipment for insulation work includes polyurethane and polyurea spray machines, spray guns, hoses and material transfer pumps, along with specialised accessories.
Contact the company's team to ask about supplying the ETM and the right equipment for your business.
Frequently asked questions
Is the PUSMAK ETM used for spraying foam?
No. It is for cutting and trimming foam after application; it is not a machine for spraying raw materials.
Does it run on 220 V power?
The manufacturer lists a nominal voltage of 230 V at 50 Hz. Check that the site's power supply is compatible before use.
What is the ETM's cutting width?
The cutting width is 38 cm according to the published specifications.
Can it be used to level foam on walls?
It can be used in applications that fit its density and thickness limits and the required finishing system.
Is there a compressed-air version?
Yes. PUSMAK offers the pneumatic PTM model for trimming polyurethane foam.
Where can I buy a foam smoothing machine in Saudi Arabia?
Contact Trusted Line to ask about supplying the PUSMAK ETM and about prices and available accessories.
Request a quote for the PUSMAK ETM in Saudi Arabia
If you are a thermal insulation contractor or run a company specialising in polyurethane spray foam, the ETM can add specialised trimming equipment to your team's kit.
Contact Trusted Line to ask about supply and to discuss your project's needs.
Request a quote for foam cutting and trimming equipment from Trusted Line
Or explore the spray foam machines and industrial equipment available.
Trusted Line – PUSMAK equipment in Saudi Arabia
Jeddah, Saudi Arabia.
Phone and WhatsApp: +966 53 882 2832.
