PUSMAK PH6 flexible spray foam hose for sale to contractors in Saudi Arabia
If you are looking for a flexible spray foam hose to equip a polyurethane machine or replace the spray gun connection, the 6 m PUSMAK PH6 is an industrial accessory designed to give the technician more freedom of movement during thermal insulation and waterproofing work.
The hose connects the main spray line to the application gun and helps reduce the effect of the main hose's weight on the operator's movement, especially on sites where the spray direction changes constantly.
Contractors and insulation companies in the Kingdom of Saudi Arabia can contact Trusted Line, PUSMAK's equipment agent, to ask about availability of the product and its accessories and get a quote.
The PUSMAK PH6 flexible spray foam hose and its features
This type of hose is known as a whip hose: a high-pressure hose used at the last section of the spray line to make the gun easier to move.
The PH6 is 6 m long, giving the operator a wider range of movement than shorter connections.
Key features
A 6 m length that gives a wide range of movement.
A flexible design that makes the spray gun easier to direct.
Suitable for compatible polyurethane and polyurea systems.
Used between the main hose and the application gun.
Helps reduce the pull of the main hose.
Suits projects where the spray direction changes constantly.
Can be used to equip a new spray line or replace an old connection.
Check that the hose diameter, pressure and fittings are compatible with the spray system before use.
To learn more about its uses, see the manufacturer's explanation of the PUSMAK PH6 flexible hose for spray foam and polyurea guns.
PUSMAK PH6 basic specifications
Before buying insulation machine accessories, a contractor needs to confirm the hose suits their existing equipment.
| Specification | Details |
|---|---|
| Brand | PUSMAK |
| Model | PH6 |
| Product type | Flexible whip hose |
| Length | 6 m |
| Use | Spraying foam and polyurea |
| Function | Connecting the main spray line to the gun |
| System type | Two-component material spraying |
| Compatibility | According to the machine and gun specifications |
Pressure and temperature limits, internal diameter and fitting type are confirmed from the actual version's specification card before buying.
Why does a contractor need a 6 m flexible hose?
On insulation projects, the operator may need to move the spray gun constantly between corners, edges and raised surfaces.
Heavy main hoses can make movement harder when connected directly to the gun.
A flexible connection helps to:
Increase the range of movement around the application area.
Reduce the pull of the main hose while directing the gun.
Make spraying around corners and architectural details easier.
Organise the operator's movement better.
Reduce the need to keep rearranging the main line.
Even so, a longer hose is not always better; choose the length that suits the work area and the project.
Uses of the PUSMAK PH6 on insulation projects in Saudi Arabia
Building and villa roof insulation
Some thermal insulation projects require reaching edges, corners and several areas of the roof.
The flexible hose can give extra freedom of movement while applying polyurethane foam.
Warehouse and hangar insulation
Industrial insulation companies need to set up long spray lines while still being able to move the gun at the point of application.
The PH6 helps provide a more flexible connection between the main line and the gun.
Spraying polyurea on floors
Polyurea applications on industrial floors may require moving the gun over successive distances while keeping a suitable spraying position.
A compatible flexible connection can make this movement easier.
Coating metal surfaces
On some industrial protection projects, the technician needs to direct the gun around irregular surfaces and edges.
The right hose helps reach work areas without constantly moving the main machine.
PUSMAK PH3 vs. PH6
PUSMAK offers flexible connections in different lengths to meet contractors' needs.
| Comparison | PH3 | PH6 |
|---|---|---|
| Length | 3 m | 6 m |
| Type | Flexible hose | Flexible hose |
| Where it is used | Next to the spray gun | Next to the spray gun |
| Range of movement | Shorter | Wider |
| Materials | Foam and polyurea | Foam and polyurea |
| Best for | Confined sites | Larger areas |
If the project needs limited movement, the PH3 may be suitable.
Projects that need a wider range of movement can consider the PH6, after checking its compatibility with the spray system.
You can also browse PUSMAK's range of polyurethane and polyurea spray hoses and equipment.
Flexible hose vs. heated hose
Spray systems use different types of hose, each with a specific job.
The heated main hose: carries materials over longer distances and helps keep them at temperature according to the system's design.
The flexible hose: is used at the application gun to give a wider range of movement.
Check the heating arrangements for each model; do not assume all flexible hoses are identical in how they are heated or insulated.
See the PUSMAK PH15 15 m heated hose and compare its function with that of flexible connections.
You can also see the PUSMAK PH30 30 m heated hose for the main line when extra length is needed.
Can the PH6 be used with Graco and other machines?
When choosing a hose for a spray machine from a different manufacturer, similar fittings or the same length are not enough.
You need to check:
The maximum working pressure.
The hose's internal diameter.
The type and size of fittings.
Chemical compatibility.
Heating requirements, if any.
The type of spray gun.
The maximum spray line length.
So it is best to give the supplier your machine and gun model before buying.
Related equipment an insulation contractor needs
A range of equipment can be bought to set up a complete spray line, depending on the project's needs.
PUSMAK SP2 spray gun
The SP2 is used to apply foam and polyurea and relies on compressed-air purge cleaning.
See the PUSMAK SP2 spray foam and polyurea gun and its specifications before choosing connection accessories.
Main hoses
Used to carry materials from the spray machine to the application area, and available in different lengths and configurations depending on the system.
Material transfer pumps
Some spray machines need pumps to move the raw components from external drums to the machine.
Options include the PUSMAK TP transfer pump for feeding spray equipment; technical compatibility must be checked.
How much does a PUSMAK PH6 hose cost in Saudi Arabia?
The cost of industrial hoses varies with the technical specifications, the type of fittings, the configuration required and supply costs.
When asking for a price, specify:
Your current spray machine model.
The type of application gun.
The material used.
The length required.
The quantity required.
The delivery city.
This information helps you get an offer that suits the project's needs.
You can contact Trusted Line to request a quote for a PH6 hose.
Why choose Trusted Line?
Trusted Line supplies PUSMAK equipment to contractors and insulation companies in the Kingdom of Saudi Arabia.
The product categories include polyurethane and polyurea spray machines, hoses, guns, feed pumps and spare parts.
Contractors can contact the company's team to review their equipment requirements and ask about products, supply options and technical support.
Tips for looking after spray gun hoses
To help keep the equipment in good condition:
Check the fittings and hoses visually before starting.
Avoid bending the hose at sharp angles.
Do not let heavy equipment drive over it.
Avoid dragging it over sharp metal edges.
Check for leaks or swelling.
Do not exceed the product's approved pressure.
Do not disconnect fittings before relieving pressure according to the system's instructions.
Replace the hose if it has damage that affects its safety.
High-pressure spray systems are equipment that needs special safety procedures and must be operated by trained people.
Frequently asked questions
How long is the PUSMAK PH6 hose?
The nominal length is 6 m.
Is it suitable for spraying foam and polyurea?
Yes. It is used in polyurethane and polyurea spray systems that match its specifications.
What is the difference between the PH3 and the PH6?
The main difference is length and the operator's range of movement: the PH3 is 3 m long, while the PH6 is 6 m.
Can it be fitted to the SP2 gun?
Compatibility with the SP2 can be confirmed by checking the fittings, pressure and the other spray system requirements.
Can I buy it without a new machine?
Yes, you can request a quote for the hose on its own; specify the machine and gun you use so compatibility can be checked.
Where can I buy spray foam hoses in Saudi Arabia?
Contact Trusted Line to ask about availability and prices of PUSMAK hoses and insulation equipment accessories.
Order a PUSMAK PH6 hose in Saudi Arabia
If you are a thermal insulation or waterproofing contractor and need a flexible hose that gives your spray gun extra room to move, contact Trusted Line to ask about the PH6.
Send details of your machine, gun and the material you use to get the right recommendation.
Request a quote for spray foam and polyurea hoses and equipment from Trusted Line
Or browse the insulation and spray equipment available from Trusted Line.
Trusted Line – PUSMAK's agent in the Kingdom of Saudi Arabia
Jeddah, Saudi Arabia.
Contact: +966 53 882 2832.
