PUSMAK EP 10 220 V spray foam machine for sale to contractors in Saudi Arabia
If you are looking for a 220 V spray foam machine to equip a thermal insulation business or carry out small and medium contracting projects, the PUSMAK EP 10 is designed to spray polyurethane foam on single-phase power, without needing a three-phase supply.
The machine has a compact design and internal raw material tanks, helping contractors set up spray work on sites that lack the electrical infrastructure needed for large industrial machines.
Trusted Line, PUSMAK's agent in the Kingdom of Saudi Arabia, supplies a range of thermal insulation equipment and accessories; customers can ask about availability of the EP 10 and get a suitable quote.
The PUSMAK EP 10 220 V spray foam machine and its features
The EP 10 is an electric polyurethane spray machine designed for small and medium professional applications.
It uses a two-component system with built-in tanks and heating and pressure control, which helps organise spraying without external transfer pumps in its basic configuration.
Key machine features
Runs on 220 V single-phase power.
A maximum flow rate of up to 4.5 kg/min.
A maximum fluid pressure of 200 bar.
Built-in material tanks with a total capacity of 56 litres.
No external transfer pumps needed in the basic feed system.
A control screen for following operating settings.
Material preheating.
Supports heated hoses up to 33 m long.
Can be operated by a single trained operator.
Easier to transport and store than larger industrial machines.
These features help contractors carry out spray foam projects on sites that need compact, easy-to-set-up equipment.
See the PUSMAK EP 10 electric polyurethane spray foam machine and its official specifications.
PUSMAK EP 10 technical specifications
Before buying any machine, a contractor should know its operating requirements and confirm it suits the power sources and materials used.
| Specification | Details |
|---|---|
| Manufacturer | PUSMAK |
| Model | EP 10 |
| Machine type | Polyurethane foam spraying |
| Power supply | 220 V |
| Phases | Single phase |
| Maximum fluid pressure | 200 bar |
| Maximum flow rate | 4.5 kg/min |
| Total tank capacity | 56 litres |
| Preheating | 2.4 kW |
| Maximum heated hose length | 33 m |
| Weight | 157 kg |
| Height | 115 cm |
| Length | 95 cm |
Some figures for current, total power and hose heating differ between published data sheets, so confirm the values for your machine version before buying and installing it.
Why is the EP 10 a good fit for insulation contractors in Saudi Arabia?
Many large spray machines run on three-phase power, which is not available on every project site.
The EP 10 helps overcome this on sites with a single-phase supply that meets the machine's requirements.
Easier site set-up
The contractor does not need a three-phase supply to use this model, but does need an electrical circuit that can handle the required current and power.
Built-in material tanks
The internal tanks reduce the need for external feed equipment, which simplifies site set-up on small projects.
Can be moved between projects
The machine is compact compared with some large hydraulic machines.
Even so, it weighs about 157 kg, so suitable transport and handling equipment should be used.
Material heating control
The machine has a heating system that helps reach the operating conditions required for compatible materials.
Uses of the EP 10 on contracting projects
1. Villa and building roof insulation
Polyurethane foam can be used for thermal insulation on suitable roofs.
The machine suits contracting teams that work on small or medium areas, according to its output and the project's requirements.
2. Ceiling and wall insulation
Some interior insulation projects need equipment that can be moved and set up in limited spaces.
The machine's compact design helps carry out spraying in places where larger equipment is hard to use.
3. Insulation in workshops and commercial buildings
The machine can be used for suitable foam applications in workshops and some commercial facilities, following ventilation, fire safety and surface preparation requirements.
4. Maintenance and small insulation projects
Contracting companies may need to carry out partial insulation work or treat specific areas.
In these cases, relatively small equipment can be a better choice than a large high-output machine.
EP 10 vs. the hydraulic KPX machines
Spray machines differ in power source, output and configuration.
| Comparison | EP 10 | KPX 20 |
|---|---|---|
| Drive type | Compact electric | Hydraulic |
| Power supply | 220 V single-phase | 380 V three-phase |
| Use class | Small and medium projects | Professional insulation projects |
| Material tanks | Built in | External feed |
| Maximum hose length | 33 m | Up to 90 m depending on the version |
| Output | Suits smaller jobs | Suits larger jobs |
If your projects need higher output or longer spray lines, it may be better to consider the PUSMAK KPX 20 hydraulic machine for thermal insulation work.
If you are looking for a compact system that runs on single-phase power, the EP 10 may suit your needs.
Can the machine run on household power?
The EP 10 runs on 220 V, but that does not mean it can be plugged into any ordinary household socket.
Make sure the electrical circuit, cables, breakers and power supply can handle the current and power requirements of your machine version.
A qualified electrician should review the installation before operation, following the manufacturer's manual.
What equipment is needed with the EP 10?
Although the machine has built-in tanks, setting up spraying still needs suitable accessories.
Spray foam gun
Used to mix the materials and apply them to the surface; make sure it suits the pressure, flow rate and connection system.
You can ask about the PUSMAK SP2 spray foam gun for industrial applications and whether it is compatible with the machine.
Heated hoses
Some foam applications need the materials kept at temperature as they travel to the spray gun.
Choose the right hose within the machine's approved maximum, taking heating and fitting requirements into account.
Safety and protective equipment
Provide personal protective equipment and proper ventilation when handling polyurethane materials, and follow the safety data sheets and application instructions.
How much does a PUSMAK EP 10 cost in Saudi Arabia?
The final price depends on the machine's configuration, the accessories required and the services included in the supply offer.
Factors that affect it include:
The type and length of hoses.
The spray gun and its accessories.
Additional spare parts.
Transport and set-up costs.
Training, warranty and maintenance services.
It is best to request a quote that includes all the equipment needed for operation, rather than relying on the machine price alone.
You can request a quote for spray foam machines and thermal insulation equipment from Trusted Line.
Why choose Trusted Line to buy insulation equipment?
Trusted Line supplies a range of PUSMAK machines and equipment to contractors and insulation companies in the Kingdom of Saudi Arabia.
The company's services include supplying spray equipment and accessories, help choosing the right machines, and maintenance, training and spare parts according to the supply terms.
Dealing with a specialist supplier helps review the machine's requirements against the project before buying.
Contractors in Jeddah, Riyadh, Makkah, Dammam and the rest of the Kingdom can contact the company to ask about equipment and supply options.
Who should consider the PUSMAK EP 10?
This machine may suit:
Contractors starting a thermal insulation business.
Insulation companies carrying out small and medium projects.
Technicians who need compact equipment.
Contracting firms working on sites without three-phase power.
Companies that want a backup machine for smaller jobs.
Very large industrial projects that need high output or long spray lines may need other models from the KPX series.
Frequently asked questions
Does the EP 10 run on 220 V?
Yes. It is designed to run on 220 V single-phase power, provided there is an electrical circuit suited to its power and current.
Does it need external material transfer pumps?
Not in its basic configuration, because it has built-in material tanks.
What is the machine's maximum output?
The published maximum flow rate is 4.5 kg/min, while actual output depends on the material and operating conditions.
Can it be used to spray polyurea?
The EP 10 is classed mainly as a polyurethane spray foam machine and should not be used for polyurea without official confirmation that the material and application are compatible.
Is it suitable for new insulation companies?
It can be a good choice for some new companies, especially those targeting small and medium projects, taking cost and operating requirements into account.
Where can I buy an EP 10 in Saudi Arabia?
Contact Trusted Line to ask about availability of the machine and its accessories, supply options and prices.
Order a PUSMAK EP 10 in Saudi Arabia
If you are a thermal insulation contractor looking for a compact machine that runs on 220 V power, the PUSMAK EP 10 is one of the options worth comparing before you buy.
Contact Trusted Line to discuss your project's needs and ask about availability of the model and the right equipment.
Request a quote for a PUSMAK EP 10 electric spray foam machine from Trusted Line
You can also see the official specifications of the single-phase PUSMAK EP 10.
Trusted Line – PUSMAK's agent in the Kingdom of Saudi Arabia
Location: Sari Street, Al Faisaliyah District, Jeddah.
Phone and WhatsApp: +966 53 882 2832.
